SONIX WP-ADA2
Description
The 2x Input & 2x Output Analogue XLR to Dante® Converter is a high-performance audio endpoint designed to bridge conventional analog audio hardware into Dante® IP digital networks. Housed in a robust metal chassis with an aluminum front panel, this unit is engineered as a standard 2-GANG EU/UK wall plate, making it ideal for both permanent AV architectural in... Read more
The 2x Input & 2x Output Analogue XLR to Dante® Converter is a high-performance audio endpoint designed to bridge conventional analog audio hardware into Dante® IP digital networks. Housed in a robust metal chassis with an aluminum front panel, this unit is engineered as a standard 2-GANG EU/UK wall plate, making it ideal for both permanent AV architectural installations and demanding live/rental environments.
Read lessHighlights
Everything at your fingertips
It features two balanced/unbalanced XLR analog inputs with 5-level sensitivity adjustment and selectable +48V phantom power, alongside two balanced/unbalanced XLR analog outputs with 5-level gain control. Built on the Dante® Ultimo 2x2 solution, it delivers crystal-clear 24-bit audio sampling up to 96kHz, configurable latency down to 1ms, and full AES67 interoperability. For maximum installation flexibility, the unit supports both Power over Ethernet (PoE Class 1 802.3af) and local 12VDC terminal block powering. Each unit comes complete with a heavy-duty plastic wall back box for clean, secure surface or flush-mount installation.
Product details
| Bidirectional Dante® Audio Bridging | 2x analog inputs and 2x analog outputs (Dante® in and Dante® out) over a single network connection. |
| Versatile XLR Connectivity | Balanced and unbalanced Female XLR inputs and Male XLR outputs for direct connection to microphones, mixers, and audio processors. |
| Mic Phantom Power (+48V) | Dedicated front-panel push buttons with backlit LED indicators for independent +48V phantom power on each input channel. |
| Precise Gain & Sensitivity Control | 5-level rotary knobs for input sensitivity (+24dBu to -28dBv) and output gain (+18dBu to -10dBv) adjustment. |
| Professional Audio Quality | Supports uncompressed 24-bit digital audio sampling at 44.1kHz, 48kHz, 88.2kHz, and 96kHz with ultra-low THD+N (< 0.015%). |
| Configurable Network Latency | Adjustable Dante® device latency options (1ms, 2ms, or 5ms) via Dante® Controller. |
| AES67 & Network Standard Support | Fully compatible with AES67 RTP audio transport for enhanced network interoperability. |
| Flexible Powering Options | Operates via PoE (Class 1 IEEE 802.3af) or local 12VDC/500mA terminal block power supply. |
| Included Mounting Hardware | Comes supplied with a custom 2-GANG plastic wall back box for hassle-free surface or in-wall mounting. |
| Rugged 2-GANG Form Factor | Built with a durable aluminum front panel and iron chassis designed to fit standard EU/UK wall cutouts. |
| Network Bandwidth | 100M |
| Control Method | Dante® Controller |
| Audio Latency | Configurable Dante® device latency (1, 2 or 5ms configurable using Dante® Controller) |
| Dante® Audio Formats | DANTE [Digital audio in/out, PCM 2CH 44.1K–96KHz 16/24Bit] |
| Analog LINE Input | LINE In [analogue audio, Balanced/unbalanced connection, Max input level 24dBu] |
| Analog MIC Input | MIC In [analogue audio, Balanced/unbalanced connection, Max input level 50mVRMS, +48V phantom power] |
| Analog Output | LINE Out [analogue audio, Balanced/unbalanced connection, Max output level 18dBu] |
| Output Impedance | 300 Ohm |
| Maximum Output Level | 18dBu |
| Frequency Response | 20Hz to 20kHz (-/+0.5dB) |
| Dynamic Range | > 90dB@0dBu, 1kHz A-weighted |
| Audio S/N Ratio | > 90dB@0dBu, 1kHz A-weighted |
| Audio THD+N | < 0.015% at +4dBu, 1kHz |
| Transmission Distance | 100m / 328ft (CAT6/6A/7) |
| ESD Protection | IEC 61000-4-2: ±8kV (Air-gap discharge), ±4kV (Contact discharge) |
| Rear Connectors | 1x DANTE [RJ45 connector, PoE], 1x DC/12V [2pin-3.5mm phoenix connector] |
| Front Connectors | 2x Audio In [3-pin XLR Female], 2x Audio Out [3-pin XLR Male] |
| Front Controls | 2x MIC Phantom Power 48V buttons with backlit LED, 2x Audio IN sensitivity knobs (5-level |
| Front Status LEDs | 1x Power LED (Green), 1x ID LED (Green) |
| Housing | Aluminum panel + Iron chassis |
| Color | White panel + Silver chassis |
| Wall Plate Dimensions (W x H x D) | 136 mm x 75 mm x 40.7 mm (5.35 in x 2.95 in x 1.60 in) |
| Faceplate Dimensions (W x H x D) | 146 mm x 85 mm x 5 mm (5.75 in x 3.35 in x 0.20 in) |
| Included Plastic Wall Box Dimensions (W x H x D) | 138 mm x 83 mm x 56 mm (5.43 in x 3.27 in x 2.20 in), Mounting Hole Spacing |
| Weight (Without Faceplate) | 0.28 kg (0.61 lbs) |
| Weight (With Faceplate) | 0.35 kg (0.77 lbs) |
| Power Supply | PoE IEEE802.3af Class 1 or DC 12V/500mA |
| Power Consumption | 3.6W (Max) |
