The Repo-Mic is the ideal complement for all paging needs related to the use of any mixer-amplifier or any other equipment requiring a paging microphone with on/off contact. It is perfectly compatible with the HELVIA REPO series mixer-amplifiers.
The gooseneck microphone has a cardioid electret condenser capsule and requires 48V phantom power for polarizati... Read more
The Repo-Mic is the ideal complement for all paging needs related to the use of any mixer-amplifier or any other equipment requiring a paging microphone with on/off contact. It is perfectly compatible with the HELVIA REPO series mixer-amplifiers.
The gooseneck microphone has a cardioid electret condenser capsule and requires 48V phantom power for polarization (received directly from the audio terminals).
The microphone base is equipped with an on/off switch on top, and level control on the rear panel. The connection, via a 5-pin Phoenix terminal, includes both the microphone signal contacts (hot, cold, and ground) and the two on/off switch contacts.
The Repo Mic can not only be used on the HELVIA REPO 240A / 350A mixer-amplifiers, but can be coupled to any installation audio equipment that accepts a microphone input signal, supplies 48V Phantom power and requires (but is not essential) an On/Off closure contact for paging.
Read less
| Compatible with REPO-240A and REPO-350A Mixer Amplifiers | |
| Capsule | Back electret condenser |
| Polar Pattern | Cardioid |
| Phantom Power | +48V |
| Control | Mic level, Page switch |
| Connectors | 5-pin Phoenix (Euroblock) |
| Frequency Response (-3dB) | 150Hz - 22kHz |
| Input Level Mic | -46dBV |
| Input Impedance Mic | 600 Ohms |
| Output Level 10dBV | |
| Output Impedance balanced | 600 Ohms |
| S/N Ratio | -60dB |
| Product Size (WxDxH) | 100 x 141 x 445/52 mm (with Mic/without Mic) (3.94 x 5.55 x 17.52/2.05 in) |
| Product Weight | 566 g. (1.25 lbs.) |
| Packing Size (WxDxH) | 430 x 235 x 65 mm (16.93 x 9.25 x 2.56 in) |
| Packing Weight | 1.01 kg (2.23 lbs.) |